Dynacord CMS 1000-3 10-Channel Compact Analogue Mixer with Twin DSP FX

Take control of your live sound. Make it shine. The Dynacord CMS 1000-3 delivers superb sound quality with precise control of every detail and powerful DSP possibilities. Two 24-bit effects processors offer studio quality effects which can be independently controlled of each other.

Quality over quantity. Each of the ten input channels features only the highest quality components. High quality components give you high quality sound, it's as simple as that. You could get more channels at a lower quality, but why compromise? Don't spread your sound too thinly. Get the best out of every single instrument with a CMS 1000-3.

Once you've got a great sound you can easily record it to a DAW thanks to the integrated USB interface. It has never been easier to get a great live sound and then capture it for live recordings.

Premium Channel Features

There are 6 mic/line level input channels available onboard the CMS 1000-3 and each input features a variety of professional features for a smooth performance. The XLR microphone input is fitted with an incredibly low-noise preamp for a discrete performance whilst condenser microphones can be switch in groups of six thanks to the integrated phantom power.

These channels are all adjustable with gain control, switchable 80Hz low-cut filter and an intuitive 3-band EQ for excellent sound shaping abilities. Additionally, each channel offers three sends: FX (post fader), AUX (switchable globally pre-/post-fader) and Monitor (pre-fader) with balance and pan control. Each input channel includes a signal/peak LED for simple motioning and there is an efficient mute and PFL button available for use.

Professional Audio Interface

Presented in 24-bit resolution, the digital interface supports sampling rates up to 96kHz for a professional level performance and supplies 2 stereo channels. Available for input and output use at the same time, the USB sends include master L and R with AUX and MON signals.

4 channels can be sent in either direction through the USB port on your PC or Mac and setup is easy with the inclusion of a DVD with Cubase LE and USB drivers.

Flexible Effect Processing

With 2 x independent 24-bit stereo effects processors, sound engineers can easily mix multiple sounds together with FX 1 and FX 2. Both sections provide 100 presets including studio-grade reverb, delay and modulation effects.

The delay time within the delay effect can be matched to the beat of the music using a tap key and similar effects can also be created and stored with 20 user memories available.

Optimal Speaker Protection

The CMS Mixer menu allows users to set matching continuous power output levels to any connected loudspeaker for a safe and reliable performance. Damage caused by thermal overload within the loudspeaker can be avoided via dynamic limiting of the maximum output power without effecting the dynamic range.

The protection component constantly monitors the energy supplied to the loudspeakers in order to limit the levels when there is a danger of overloading.

Included In The Box

• 1 x CMS 1000-3
• 1 x User Manual
• 1 x Mains Cord
• 1 x Warranty Certificate With Safety Instructions
• 1 x DVD With USB Drivers and Cubase LE Software

Features

• First-class components with faders & pantentiometres
• Intuitive, easy-to-use mixer section
• 2 x editable digital effects devices
• Professional 4 x In / 4 x Out digital interface
• Stereo EQ for main mix
• Large OLED display

Specifications

• Channels (Mono and Stereo): 6 and 4
• Auxiliaries (MON, FX, AUX): 2 Pre, 2 Post, 2 Pre/Post Switchable
• Mic Gain (Mono/Stereo): 0 to +60 dB / +10 to +60 dB
• Line/CD/USB Gain (Stereo): -10 to +20 dB
• THD, At 1kHz, MBW = 80kHz
  • Mic Input To Master A L/R Outputs, +16 dBu, Typical: <0.005 Percent
• Frequency Response, -3 dB: 15Hz to 70kHz
• Crosstalk
  • Fader and FX/AUX/MON-Send Attenuation: >85 dB
  • Channel to Channel: <-80 dB
• CMRR, Mic Input, 1kHz: >80 dB
• Input Sensitivity, All Level Controls In Max Position
  • Mic / Line (Mono) / Line (Stereo) / CD (Stereo): -74 dBu / -54 dBu / -34 dBu / -34 dBu
• Maximum Level, Mixing Desk
  • Mic Inputs: +21 dBu
  • Mono Line Inputs / Stereo Line Inputs: +41 dBu / +30 dBu
  • All Other Inputs: +22 dBu
  • All Other Outputs: +22 dBu
• Input Impedance
  • Mic / Insert Return: 2kΩ / >3.3kΩ
  • 2 Track Return & CD In: 10kΩ
  • All Other Inputs: >15kΩ
• Output Impedance
  • Phones: 47Ω
  • All Other Outputs: 75Ω
• Equivalent Input Noise: -130 dBu
• Noise, Channel Inputs To Master A L/R Outputs, A-Weighted
  • Master Fader Down: -97 dBu
  • Master Fader 0 dB, Channel Fader Down: -91 dBu
  • Master Fader 0 dB, Channel Fader 0 dB, Channel Gain Unity: -83 dBu
• Equalisation
  • LO Shelving: ±15 dB / 60Hz
  • MID Peaking, Mono Inputs: ±15 / 100Hz to 8kHz
  • MID Peaking, Stereo Inputs: ±12 dB / 2.4kHz
  • HI Shelving: ±15 dB / 12kHz
  • Master EQ 11-Band: ±10 dB / Q = 1.5 to 2.5
• Power Consumption
  • Without Lamp / With Lamp: 45W / 50W
• Filter
  • LO-CUT, Mono Inputs: F = 80Hz, 18 dB/oct.
  • Voice Filter, Mono Inputs: Switchable
  • Feedback Filter, MON 1/2: 70Hz to 7kHz, Notch, -9 dB
• Effects
  • Type, Effects Presets: Dual Stereo 24/48-Bit Multi Effects Processors, 100 Factory amd 20 User, Tap-Delay
  • Remote Control: Footswitch, MIDI
• Display: 128 x 64 Pixels, OLED
• Digital Audio Interface
  • Channels: 4 In / 4 Out
  • AD/DA Conversion, Sampling Rate: 24-Bit, 44.1 / 48 / 88.2 / 96kHz
  • PC Interface: USB 2.0, Female Type B
• MIDI Interface: 5-Pin DIN Connector, In/Out
• Protection
  • Mixer Outputs (Relay Controlled): MON 1, MON 2, MASTER A
  • Switching Mode Power Supply: Mains Over/Undervoltage, High Temperature
• Phantom Power: +48V DC
• Power Requirements: 100V to 240V AC, 50/60Hz
• Weight: 9.5 kg
• Dimensions
  • Height: 155 mm
  • Width: 510.5 mm
  • Depth: 498.5 mm